ESP32 Cam WiFi Bluetooth Camera Module Development Board With OV2640 Camera Module (ESP32 Camera)

ESP32 CAM is a WiFi And Bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system. ESP integrates WiFi, traditional Bluetooth and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc. Fully compliant with WiFi 802.11b/g/n/e/i and bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other host MCUs to add networking capabilities to existing devices. ESP32-CAM can be widely used in various IOT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IOT applications. It is an ideal solution for IOT applications.ESP32 Cam Specification:Module modelESP32-CAMSPI Flashdefault 32MbitRAMinternal 520KB external 4M PSRAMBluetoothBluetooth 4.2BR/EDR and BLE standardsWi-Fi802.11 b/g/n/e/iSupport interfaceUART, SPI, I2C, PWMSupport TF cardMaximum support 4GIO port9Serial port ratedefault 115200 bpsImage output formatJPEG (only supported by OV2640), BMP, GRAY-SCALESpectrum range2412 ~ 2484 MHzAntenna formon-board PCB antenna , gain 2dBiTransmit power802.11b: 17±2 dBm (@11Mbps) 802.11g: 14±2 dBm (@54Mbps) 802.11n: 13±2 dBm (@MCS7)Receiving sensitivityCCK, 1 Mbps : -90dBm CCK, 11 Mbps: -85dBm 6 Mbps (1/2 BPSK): -88dBm 54 Mbps (3/4 64-QAM): -70dBm MCS7 (65 Mbps, 72.2 Mbps): -67dBmPower consumptionTurn off the flash: 180mA@5V Turn on the flash and adjust the brightness to the maximum: 310mA@5V Deep-sleep: The lowest power consumption can reach 6mA@5V Moderm-sleep: up to 20mA@5V Light-sleep: up to 6.7mA@5VSecurityWPA/WPA2/WPA2-Enterprise/WPSPower supply range5VOperating temperature-20 °C ~ 85 °CStorage environment-40 °C ~ 90 °C, < 90%RHESP32 Cam Features:Ultra-small 802.11b/g/n Wi-Fi BT/BLE SoC moduleLow-power dual-core 32-bit CPU for application processorsUp to 240MHz, up to 600 DMIPSBuilt-in 520 KB SRAM, external 4M PSRAMSupports interfaces such as UART/SPI/I2C/PWM/ADC/DACSupport OV2640 and OV7670 cameras with built-in flashSupport for images WiFi uploadSupport TF cardSupport multiple sleep modesEmbedded Lwip and Free RTOSSupport STA/AP/STA AP working modeSupport Smart Config/Air Kiss One-click distribution networkSupport for serial local upgrade and remote firmware upgrade (FOTA)Support secondary developmentPackage Included:1 x ESP32-CAM Module1 x Camera Module OV2640 2MP